Page 2 of 3 First 123 Last
Results 11 to 20 of 30
  1. #11
    0 RP

    Join Date
    Aug 2008
    Country
    Malta
    Posts
    1
    Thanks
    0

    Default

    I did find the firmware but i m afraid that my phone will become a brick or something. Does anyone know how to install the firmware?

  2. #12
    0 RP
    diovan's Avatar
    Join Date
    Jan 2008
    Country
    Indonesia
    Posts
    2
    Thanks
    0

    Default

    lucky me, my wife had java friendly type

  3. #13
    0 RP

    Join Date
    Sep 2009
    Country
    India
    Posts
    4
    Thanks
    0

    Default

    Quote Originally Posted by Gilmore01 View Post
    I did find the firmware but i m afraid that my phone will become a brick or something. Does anyone know how to install the firmware?
    1. Download Firmware and Multiloader from the site first
    2. Make sure Samsung PC Studio is installed and communicates with your phone
    3. Unrar the firmware in a folder you can easily find it.
    4. Remove the Sim and MicroSD from your phone and replace the battery.
    5. Now press vol top button+camera key+powerbutton at the same time in switch off mode without attaching the datacable.
    6. Soon u will see a new screen which says Download.
    7. Now attach the datacable to the phone and open Multiloader which u donwloaded earlier.
    8. Select the radio button that includes MSM6250/MSM6250A or BRCM2133 for S5230/5233 (Samsung Star)
    9. Select Boot Change,Full Download and master rom boxes.
    10. Then click Boot, and select the boot files from the unpacked firmware folder.
    11. Click the Amss, Rsrc1, and Rsrc2.
    12. Select (Low).r2c NOT (Mid).r2c. (Phone may not restart if you select mid)
    13. Then press the Factory FS tab, and select the appropriate files from the firmware folder also.
    14. FOTA and ETC fields are left blank.
    15. Click the Port Search button, it will find your phone and show the com port is ready.
    16. Click the download button and be patient, this will take a few minutes to complete.
    17. When it's finished, it will show "ok complete".
    18. Unplug the phone from the USB cable, reinstall the sim, MicroSD, and power up the the phone.
    19. Now with every thing complete, You can perform a hard reset by typing *2767*3855# into the hand set (but not necessary.)
    20. When the phone resets type *#1234# into your handset to check your new firmware ver.

    your new Firmware is updated and ready to use.

  4. #14
    0 RP

    Join Date
    Sep 2009
    Country
    India
    Posts
    1
    Thanks
    0

    Default error in TkFileExplorer

    when i download jar and jad file via TkFileExplorer from computer to phone some one error came in that time and jar or jad file not download in phone samsung gts5233a

  5. #15
    0 RP

    Join Date
    Feb 2008
    Country
    United Kingdom
    Posts
    1
    Thanks
    0

    Default

    Thanks so much worked a treat can install all jar files now
    Quote Originally Posted by sathish_arkay View Post
    1. Download Firmware and Multiloader from the site first
    2. Make sure Samsung PC Studio is installed and communicates with your phone
    3. Unrar the firmware in a folder you can easily find it.
    4. Remove the Sim and MicroSD from your phone and replace the battery.
    5. Now press vol top button+camera key+powerbutton at the same time in switch off mode without attaching the datacable.
    6. Soon u will see a new screen which says Download.
    7. Now attach the datacable to the phone and open Multiloader which u donwloaded earlier.
    8. Select the radio button that includes MSM6250/MSM6250A or BRCM2133 for S5230/5233 (Samsung Star)
    9. Select Boot Change,Full Download and master rom boxes.
    10. Then click Boot, and select the boot files from the unpacked firmware folder.
    11. Click the Amss, Rsrc1, and Rsrc2.
    12. Select (Low).r2c NOT (Mid).r2c. (Phone may not restart if you select mid)
    13. Then press the Factory FS tab, and select the appropriate files from the firmware folder also.
    14. FOTA and ETC fields are left blank.
    15. Click the Port Search button, it will find your phone and show the com port is ready.
    16. Click the download button and be patient, this will take a few minutes to complete.
    17. When it's finished, it will show "ok complete".
    18. Unplug the phone from the USB cable, reinstall the sim, MicroSD, and power up the the phone.
    19. Now with every thing complete, You can perform a hard reset by typing *2767*3855# into the hand set (but not necessary.)
    20. When the phone resets type *#1234# into your handset to check your new firmware ver.

    your new Firmware is updated and ready to use.

  6. #16
    0 RP

    Join Date
    Oct 2009
    Country
    India
    Posts
    2
    Thanks
    0

    Question



    i tried searching for firmware S5230XIIE2 and i found it in some torrent site which was having a virus. Is there any trusted download link for downloading the firmware and the multiloader??? And i am using S5233 is S5230XIIE2 firmware compactible on my phone also?? Please reply..

  7. #17
    0 RP

    Join Date
    Oct 2009
    Country
    United Kingdom
    Posts
    1
    Thanks
    0

    Default

    Put darkforestgroup into google and you will find want you want.

  8. #18
    0 RP

    Join Date
    Oct 2009
    Country
    Lithuania
    Posts
    3
    Thanks
    0

    Cool i dont see a problem!!!

    i have samsung s 5230 star, and simply using bluetooth, sending jar files to phone, and it works!

  9. #19
    0 RP

    Join Date
    Oct 2009
    Country
    Lithuania
    Posts
    3
    Thanks
    0

    Unhappy but...

    i have samsung sgh-j800, on that phone having same problem!

  10. #20
    0 RP

    Join Date
    Oct 2009
    Country
    India
    Posts
    3
    Thanks
    0

    Default

    Quote Originally Posted by sathish_arkay View Post
    1. Download Firmware and Multiloader from the site first
    2. Make sure Samsung PC Studio is installed and communicates with your phone
    3. Unrar the firmware in a folder you can easily find it.
    4. Remove the Sim and MicroSD from your phone and replace the battery.
    5. Now press vol top button+camera key+powerbutton at the same time in switch off mode without attaching the datacable.
    6. Soon u will see a new screen which says Download.
    7. Now attach the datacable to the phone and open Multiloader which u donwloaded earlier.
    8. Select the radio button that includes MSM6250/MSM6250A or BRCM2133 for S5230/5233 (Samsung Star)
    9. Select Boot Change,Full Download and master rom boxes.
    10. Then click Boot, and select the boot files from the unpacked firmware folder.
    11. Click the Amss, Rsrc1, and Rsrc2.
    12. Select (Low).r2c NOT (Mid).r2c. (Phone may not restart if you select mid)
    13. Then press the Factory FS tab, and select the appropriate files from the firmware folder also.
    14. FOTA and ETC fields are left blank.
    15. Click the Port Search button, it will find your phone and show the com port is ready.
    16. Click the download button and be patient, this will take a few minutes to complete.
    17. When it's finished, it will show "ok complete".
    18. Unplug the phone from the USB cable, reinstall the sim, MicroSD, and power up the the phone.
    19. Now with every thing complete, You can perform a hard reset by typing *2767*3855# into the hand set (but not necessary.)
    20. When the phone resets type *#1234# into your handset to check your new firmware ver.

    your new Firmware is updated and ready to use.



    where to find the firmware and multiloader??

Page 2 of 3 First 123 Last