Results 1 to 3 of 3
  1. #1
    0 RP

    Join Date
    May 2010
    Country
    India
    Posts
    44
    Thanks
    28

    Default gnubox-share your internet on mobile phone s60v3

    through this software u can share ur pc dsl on ur symbian s60v3 mobile phones via bluetooth.
    gnubox.sis is singned but in order to instll it properly u have to do something . whose details are given at http://www.funmaza.com/secman_sign_u...pda_step1.html

    step 4 is not required here. because gnbox is already singed

    after the installation of gnubox



    INSTALLATION INSTRUCTION:
    Pls install your gnubox on ur phone first...
    Install mRouter on your PC also..

    ON YOUR PC (Microsoft BT stack)
    Switch on BT on ur PC and ur fone.
    Step1:

    Right click the BT icon in the system tray, "Open Bluetooth Settings"
    go to "COM Ports".
    If it is blank, click on "Add"-> "Incoming (device initiates the connection)"
    Look at the COM number...mine is COM4. it varies...let's put it as COM#
    Step2:

    Go to "Control Panel" -> "Phone and Modem options". Select the tab "Modem"
    Add a modem. Check the box saying "Don't detect modem".
    Select the type as "Communications cable between two computers"
    connected on Bluetooth Serial Port COM#
    Step3:

    Right click on the mRouter icon on the system tray go to "Connected Device"
    Refresh the page until it discovers ur phone. Select your fone in the device selection
    screen and click "Next>".
    Uncheck the box where it says ďAutomatically connect to this device when it is in rangeĒ
    and click "Finish"
    Step4:

    Now right click on the m-Router taskbar icon and click on "Advanced Settings"
    Click on the View button under "Additional COM Ports"
    Select the COM Port used by your Bluetooth device (COM#)
    After setting the COM Port, click "OK"
    Under connectivity methods, look for Additional COM Ports and expand it to make
    sure your COM port is there. Click "Close"
    Make sure that there is no error message...
    Now that our m-Router is all set, letís configure Gnubox!!
    GNUBOX!!
    Step1: On the phone, Go to "Tools"->"Settings"->"Connection"->"Access points"
    Go to "Options"->"New access point"->"Use default settings"
    Name it 'Bt' .
    Make sure you set it to use 'Data call' as the bearer.
    Set the number to call to something that cannot be called (e.g 321),
    username as abc, password: xyz
    Leave the rest as it is...
    Then, "Options"->"Advanced Setting" Leave all untouched EXCEPT "Proxy Port Number".
    enter it as 6588
    Step2:

    Start GnuBox.
    Now you should see on the screen that the DialOutISP record is found,
    and the phone number you just entered is printed on the screen.
    However, the ModemBearer should still show 'No rec'.
    - Select "Options"->"Install"->"Create records"
    - Exit gnubox with "Options"->"Exit"
    - Start GnuBox again.
    - Now you should see on the screen that the ModemBearer is shown and the 'No rec' error is gone.
    - Create the bluetooth pairing between your phone and the computer.
    - Launch GnuBox. Select "Install"->"Set RAS login script"
    - Then select "2box bluetooth"->"Serial port"
    - On the upcoming device selection dialog, select your computer,
    and in the question about encryption click Yes (or OK if you only have that).
    - Launch your phone browser and enjoy!!

    ----

    If any problem, u can contact me freely except for signing issue.

    Enjoy high speed browsing on your mobile

    http://depositfiles.com/files/vbguj8dor

  2. #2
    0 RP

    Join Date
    Apr 2011
    Country
    India
    Posts
    13
    Thanks
    11

    Default

    thanx broher

  3. #3
    0 RP

    Join Date
    Sep 2009
    Country
    Pakistan
    Posts
    1
    Thanks
    5

    Default

    bro. im having prob. with this while doing this on my nokia c5, as there is only packet data option when i make new access point, plz help